Allstar 110925 MVP Remote Review

The Allstar 110925 MVP is a quick code three-button remote that is designed to remotely operate garage door and gate openers. This unit is based on the latest technology and gives optimum performance and maximum flexibility.

Basic Specifications

The Allstar 110925 MVP Remote can control up to three garage gates with each of its buttons is independently programmable. The product has a testing or programming LED that flashes or blinks during programming operations. The item includes two-3V CR2032 batteries and also features a visor mounting clip and programming manual. The unit also functions as a key chain unit and has a dimension of 3.15 x 1.65 x 0.6 inches. The Allstar 110925 works on a 318MHz frequency.

Allstar 110925 MVP

Tips on How to Program (or Reprogram the Item) Plus Compatibility with other Remotes

The Allstar 110925 MVP Quick-Code transmitter works as a Linear MVP and Challenger E-Series Residential Garage Door Operator and is designed to be compatible with all Linear MVO series receivers. Since each button of the Quick-Code transmitter may be programmed with a unique code, it is possible to control a single operator or a group of operators at one location or at multiple locations.

To program the Allstar 110925, put the transmitter in Program Mode. Simply press and hold the “+” button so that the RED light will turn on. Press and hold the “-“button and hold them simultaneously until the LED starts to blink. After approximately 5 seconds, release both buttons and it will confirm you are in the programming mode.

Afterwards, select the button you want to use. Enter your 9-digit code and confirm entry. Programming of the remaining buttons is also necessary.

Leave a Reply