LiftMaster Gate and Door Operators Product Information

LiftMaster has been in service for over 45 years. Over those years, they have released a lot of products that are made for everyone’s convenience. Over time, upgrades were made and new products were released to serve the customers better. Back then, automatic garage door openers were taboo much less a garage. People just park their cars wherever they could park them. When garages were invented, LiftMaster made sure that they could be of service.

They invented garage door openers and operators. Here are their products and products information:

LiftMaster Elite TAC-1 Single Line Telephone Access Control

liftmaster-elite-tac-1-single-line-telephone-access-control
image via liftmaster.msipressroom.com
  • Provides wired communication and secure access control at the gate or door
  • Hardwired for power and connected directly to the existing telephone line
  • Can deliver complete independent wireless control of two entrances when paired with LiftMaster Door or Gate Access Systems, or a LiftMaster Security+ receiver
  • Call Waiting, Intercom Mode
  • Call Forwarding, Remote Open
  • Distinctive Ringing, 200 4-Digit Codes Can Be Set As Permanent Or One Time only
  • Do Not Disturb Mode, Two Relays
  • Vacation Mode, Security + Rolling Code Technology
  • Party Mode, Programming: Keypad, Touch Tone Phone

LA 500DCS Control Arm
(for swing gate operator LA500)

la-500dcs-control-arm
image via gatecrafters.com
  • Secondary Operator for a dual gate operator system
  • For gates up to 18′ long and weighing up to 600 lbs.
  • Connects to the master operators control board via the include 40′ cable and connection box

The LiftMaster 3900 Light-Duty Jackshaft Operator

the-liftmaster-3900-light-duty-jackshaft-operator
image via amazon.com
  • Specially designed for garages and unique applications that don’t allow for a traditional garage door opener
  • For garages with very low, cathedral or obstructed ceilings
  • For sectional doors only, up to 14 ft. high or 180 sq. ft., 650 lbs
  • Ultra-quiet 24VDC motor performance
  • Push button limit settings/automatic force sensing allows for faster setup
  • Optional Battery Backup reliably opens door even when the power goes out
  • Quick-Connect™ terminals for faster wire installation

LiftMaster 3950 Jackshaft Operator

liftmaster-3950-jackshaft-operator
image via baalumni.com
  • For commercial rolling sheet door applications
  • For commercial use only and ideal for self-storage facilities
  • The maximum recommended duty cycle for this door is ten cycles per hour
  • The door can be opened manually if necessary

LiftMaster 466LM Wireless Digital Keypad

liftmaster-466lm-wireless-digital-keypad
image via walmart.com
  • Ideal for use on apartment or controlled access applications
  • Wireless keypad runs from 6 volt battery
  • Handles up to 100,000 individual codes
  • Illuminated stainless steel faceplate and keypad
  • Key mounts to a gooseneck post (optional) or direct to a wall
  • Replaceable 6-volt alkaline battery will provide up to 5 years of reliable service
  • Rugged tamper-resistant case and “low battery” indicator
  • Requires the addition of a LiftMaster Radio Receiver (412HM recommended)

LiftMaster 8500 Jackshaft Operator

liftmaster-8500-jackshaft-operator
image via yellowpages.ca
  • Specially designed for garages and unique applications that don’t allow for a traditional garage door opener
  • For sectional doors only, up to 14 ft. high or 180 sq. ft., 650 lbs
  • Ultra-quiet 24VDC motor performance
  • Auto force and electronic limits mean the garage door opener adapts to weather and changing environmental conditions
  • Battery Backup capable enables the user to get in the garage every time, even when the power is out
  • The Smart Garage Door Opener® – lets you electronically program additional remotes or a keyless entry from the MyQ® Control Panel®
  • Quick-Connect™ terminals for faster wire installation 200 watts of light with adjustable light time delay
  • Ideal for vaulted ceilings
  • The Protector System® – automatically reverses the door if anything interrupts the beam while door is going down

Liftmaster DHJ 5011 Industrial-Duty Hoist

liftmaster-dhj-5011-industrial-duty-hoist
image via bradsdoors.com
  • UL325-2010 monitored entrapment capability complete with photo sensors
  • Solid-state logic 4.0 (L4) circuit board
  • Floor-level chain hoist with electrical interlock for emergency door operation
  • Three-button control station
  • Heavy-duty 5L V-belt
  • Protects door and operator with an adjustable friction clutch
  • Fully adjustable linear-driven limit mechanism

LiftMaster DJ5011 Industrial Jackshaft

liftmaster-dj5011-industrial-jackshaft
image via solucionesenaccesosmg.com.mx
  • Solid-state logic 4.0 (L4) circuit board
  • First-stage heavy-duty 5L V-belt; second and third stages #48 chain; #50 drive chain
  • Easy emergency manual operation using an electrically interlocked floor-level disconnect
  • Three-button control station
  • Included adjustable friction clutch for protection against door damage
  • Self-locking mechanical reduction system functions as a holding brake

LiftMaster GH5011L4 Heavy Industrial Gear Reduced Hoist

liftmaster-gh5011l4-heavy-industrial-gear-reduced-hoist
image via electrosistemasdeguadalajara.com
  • UL325-2010 monitored entrapment capability uses photo sensors for monitored entrapment protection
  • Reduced drive chain hoist with electrically interlocked floor-level disconnect for manual operation
  • Three-button station for open/close/stop functionality
  • Wiring factory preset to C2 mode
  • Heavy-duty solenoid-actuated brake
  • Adjustable friction clutch protects both your door and your operator
  • Emergency disconnect

LiftMaster H 5011 Hoist Operator

liftmaster-dj5011-industrial-jackshaft
image via cdn3.volusion.com
  • Motor: Continuous-duty, high starting torque motor with instant reverse and overload protection
  • Drive Reduction: First stage heavy-duty 5L V-belt; second and third stages #48 chain; #50 chain
  • Emergency Manual Operation: provides easy emergency manual operation using an electrically interlocked floor level disconnect and chain hoist mechanism
  • External Radio Control Terminal: External terminals provide quick, convenient connections for radio controls
  • Positive Locking Mechanical Brake System: Efficient self-locking mechanical reduction system that functions as a holding brake
  • Friction Clutch: Adjustable friction clutch helps protect against major damage to door and operator should the door meet an obstruction
  • Bearings: Industrial ball bearings on a “1” output shaft; heavy-duty, oil filled iron bearings on reduction shafts
  • Control Circuit: 24V NEC Class 2
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame, all reduction sprockets drilled and pinned to shafts
  • Pushbutton Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators
  • Maintenance Alert System: provides an accurate method for tracking door use and establishing safe and effective maintenance programs for the door and the operator
  • Maximum Run Timer: Protects against damage to the door and operator
  • Auxiliary Reversal System: If a closing door strikes an obstruction, the system will detect the slip of the clutch and reverse the door to the full open position
  • Delay-on-Reverse Circuit, Programmable Mid-Stop
  • Commercial Protector System: An inexpensive “non-contact” photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open
  • Sensing Edge: Designed to sense an obstruction and signal door operator to stop or reverse as desired
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close the door
  • Brake: Heavy-duty solenoid actuated brake
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator
  • CPS II Commercial Protector System II: powerful photo sensors to provide a UL approved self-monitoring operator for commercial door applications
  • Timer-to-Close Option: provides the ability to close the door at a programmable time from 5 seconds up to 1 hour
  • Auxiliary Contact Board Option: Features both normally-open and normally-closed contacts that actuate when unit is powered down
  • Warning Signal Option Board: Provides apartment warning light function for use with red/green light module
  • Will support audio warning devices. Will provide warning prior to closing

LiftMaster H5011U Industrial Duty Hoist

liftmaster-h5011u-industrial-duty-hoist
image via laroydoor.com
  • Reversing contactor circuit features a floor-level chain hoist with electrical interlock
  • Heavy-duty 5L V-belt
  • Positive lock mechanical holding brake
  • Prewired to accept sensing devices
  • External radio control terminals
  • Fully adjustable linear-driven limit mechanism
  • Adjustable friction clutch included
  • One of the top products for use with industrial sectional doors featuring high or vertical lift
  • This garage door opener can be used with rolling doors and grilles
  • Comes with a three-button control station and features a high-starting torque continuous-duty motor with overload protection

LiftMaster HJ5011 Industrial Hoist/Jackshaft

liftmaster-hj5011-industrial-hoist
image via merik.com
  • Works with rolling doors and grilles, making it a versatile choice
  • Includes a high-starting torque continuous-duty motor with overload protection
  • UL325-2010 monitored entrapment capability with advanced sensors offer primary monitored entrapment protection
  • UL-listed and UL-labeled for observance of local codes and standards
  • Floor-level chain hoist with electrical interlock for emergency manual door operation
  • Three-button control station
  • Heavy-duty 5L V-belt
  • Comes with adjustable friction clutch to help avoid damage
  • Fully adjustable linear-driven limit mechanism

LiftMaster J5011L4 Industrial Duty Jackshaft with Safety Beams

liftmaster-j5011l4-industrial-duty-jackshaft-with-safety-beams
image via prodoorsystems.com
  • For continuous-duty use this is one of the best commercial garage door openers available today
  • Includes safety beams as well as a high-starting torque motor
  • Timer-to-close function 1-sec or 15-sec increments with timed automatic door closure
  • Maintenance Alert System™ creates a routine maintenance schedule and includes a self-diagnostic system
  • Three-channel, 315MHz radio receiver accepts up to 23 Security+ or unlimited DIP switch remotes
  • Diagnostic LEDs speed installation and troubleshooting
  • Continuous-duty high-starting torque motor with instant reverse and overload protection
  • Adjustable friction clutch included for damage protection
  • Emergency disconnect for emergency manual operation
  • PosiLock Mechanical Brake System (self-locking mechanical reduction system)

LiftMaster LA 500-U Residential Swing Gate Operator

liftmaster-la-500-u-residential-swing-gate-operator
image via gatesnfences.com
  • The LA500-u is capable of operating gates up to 18 ft. long or weighing up to 1,600 lbs, and is compact enough to fit where pad mount operators do not
  • The LA500-U model is liftmaster’s most advanced residential DC swing gate operator
  • Equipped with industry-leading features like MyQ and Security+ 2.0 communications, battery backup, and a capacity to handle gates up to 18 feet and 1,600 lbs.
  • An on-board radio receiver is included
  • Holds up to 50 remotes and is compatible with HomeLink version 4 and higher
  • Now includes the photoeyes built in
  • Operator duty rating: 300 cycles per day
  • Gate travel speed: 90-degree opening in 15-17 seconds
  • Commercial duty aluminum die cast housing
  • Weight: 140 lbs.
  • Battery Backup System provides up to 7 days or 500 cycles on battery backup; powers safety and ancillary devices
  • Power Management System protects battery life
  • Security+ 2.0 technology virtually eliminates interference; receiver holds up to 50 remotes; HomeLink compatible
  • Continuous-duty motor with soft start/stop
  • Power: 110V or 220V Single Phase (220V single phase requires torroid transformer kit)
  • Surge/spike protection
  • Construction: Full length commercial duty cast aluminum housing. Control Box; High impact polycarbonate
  • Weight: control arm 25 lbs. Control box 20 lbs, External obstruction sensing
  • Simple-to-set electronic limit system maintains accurate gate position throughout gate travel
  • Keyed manual disconnect, Plug-in loop detectors, Programmable auxiliary relays
  • Advanced traffic management control includes Quick-Close and Anti-Tailgating functions
  • Bi-part delay: choose from Standard Operation or Synchronized Close
  • Solar ready; home and property owners can qualify for up to a 30% tax credit

LiftMaster LA 500U-2 dual residential Swing Gate Operator

liftmaster-la-500u-2-dual-residential-swing-gate-operator
image via austingatedoctors.com
  • Has a powerful 24VDC continuous-duty motor and is capable of operating gates up to 18 ft. long or weighing up to 1,600 lbs
  • Equipped with industry-leading features like MyQ and Security+ 2.0 communications, battery backup, and a capacity to handle gates up to 18 feet and 1,600 lbs.
  • An on-board radio receiver is included. It holds up to 50 remotes and is compatible with HomeLink version 4 and higher
  • Exclusive from LiftMaster, this on-board radio receiver provides a single remote control solution for gates and additional access points
  • New updated unit includes the photoeyes
  • Operator duty rating: 300 cycles per day; Gate travel speed: 90-degree opening in 15-17 seconds
  • Commercial duty aluminum die cast housing; Weight: 165 lbs.
  • Battery Backup System provides up to 7 days or 500 cycles on battery backup; powers safety and ancillary devices
  • Power Management System protects battery life; Continuous-duty motor with soft start/stop
  • Security+ 2.0 technology virtually eliminates interference; receiver holds up to 50 remotes; HomeLink compatible
  • Power: 110V or 220V Single Phase (220V single phase requires torroid transformer kit); Surge/spike protection
  • Construction: Full length commercial duty cast aluminum housing. Control Box; High impact polycarbonate
  • Weight: control arm 25 lbs. each the control box is 20 lbs
  • Simple-to-set electronic limit system maintains accurate gate position throughout gate travel
  • Keyed manual disconnect; Plug-in loop detectors
  • Programmable auxiliary relays; External obstruction sensing
  • Advanced traffic management control includes Quick-Close and Anti-Tailgating functions
  • Bi-part delay: choose from Standard Operation or Synchronized Close
  • Solar ready; home and property owners can qualify for up to a 30% tax credit

LiftMaster LGJ Light Duty Gear Reduced Jackshaft

liftmaster-lgj-light-duty-gear-reduced-jackshaft
image via prodoorsystems.com
  • Includes an internal door lock sensing circuit and floor-level disconnect for emergency manual operation
  • Three-button control station with 24VAC control circuit
  • Solid-state control and motor drive
  • High starting torque motor with overload protection (removable without affecting limit switches)
  • Long-life dry type capacitor; Heavy-duty wormgear-in-oil-bath speed reducer
  • Prewired to accept sensing devices; Fully adjustable linear driven limit switch mechanism

LiftMaster MGJ 5011U Medium Duty Gear Reduced Jackshaft Operator

liftmaster-mgj-5011u-medium-duty-gear-reduced-jackshaft-operator
image via bobsdist.com
  • This medium duty, gear-reduced jackshaft operator is the perfect choice for rolling grilles and shutters
  • Included in its compact design are a high-starting torque motor and a heavy-duty wormgear reducer
  • Features a floor-level disconnect for emergency manual operation
  • Three-button control system with three-channel, 315MHz radio receiver
  • Integrated timer-to-close (TTC) function for timed automatic door closure
  • Powerful 1/2 HP single-phase motor with instant reverse and automatic reset thermal overload
  • Monitored safety device CPS-U safety beams; Programmable C2 or B2 wiring options; Solid-state medium-duty circuit board

LiftMaster MH5011U Medium-Duty Hoist Operator

liftmaster-mh5011u-medium-duty-hoist-operator
image via m.alibaba.com
  • Adjustable friction clutch; standard solenoid brakes
  • High-starting torque motor; compact design
  • Emergency chain hoist with an electric interlock
  • Medium-duty logic technology with a three-button control system and 315MHz radio receiver
  • Integrated timer-to-close (TTC) function for timed automatic door closure
  • Powerful 1/2 HP 115V single-phase motor with instant reverse and automatic reset thermal overload
  • Monitored safety device CPS-U safety beams; Programmable C2 or B2 wiring options
  • Easy emergency manual operation using a floor level disconnect

LiftMaster MHS5011 Slow Speed Hoist for Rolling Sheet Doors

liftmaster-mhs5011-slow-speed-hoist-for-rolling-sheet-doors
image via tracrite.com
  • This hoist operator uses slow speeds to ensure safety for rolling sheet doors
  • Features a high-starting torque motor with overload protection and an adjustable friction clutch
  • Protect against entrapment with the UL325-2010 monitored entrapment feature
  • Checked at final inspection for compliance with UL-listed and UL-labeled local codes
  • Solid-state medium-duty logic circuit board; Floor-level disconnect
  • Wiring factory present to C2 mode; Three-button control station
  • Powerful 1/2 HP, 115V single-phase motor with instant reverse, capacitor start, and overload protection

Leave a Reply

Your email address will not be published. Required fields are marked *